slipsil installation
1

SLIPSIL Installation Steps

CSD Sealing Systems products are simple and effective with noteable ease of installation, making it easier to achieve an effective fire stopping, gas tight and water tight seal. See installation instructions for SLIPSIL Seals for Cable and Pipe Entries below.

SLIPSIL Sealing Plugs

Installation instructions for cable and pipe entries.

Click on a step to view a bigger version. (Use the arrows to scroll)

STEP 1

STEP 1

Before starting the installation, any dirt or oil residues should be removed from the conduit opening. The internal diameter should be checked to make sure it is within tolerance of the SLIPSIL sealing plug selected.

 

STEP 2

STEP 2

The inside wall should then be treated with CSD lubricant along a distance which approximately corresponds with the length of the sealing plug.

STEP 3

STEP 3

The inside surfaces of both segments of the sealing plug need to then be covered with CSD lubricant.

STEP 4

STEP 4

The outer surfaces of both segments of the sealing plug need to be then covered with CSD lubricant.

STEP 5

STEP 5

Place both segments of the sealing plug into the conduit opening as far as the first serration. This should be placed around the pipe or cable if one is ducted.

STEP 6

STEP 6

Push both segments of the sealing plug evenly by hand, serration by serration, further into the conduit opening.

STEP 7

STEP 7

For some plugs at extreme tolernace, a wooden section and mallet may be required.

STEP 8

STEP 8

Air can become trapped inside the penetration. Use a lubricated screwdriver and carefully insert the end between the two plug segments to release the air.

STEP 9

STEP 9

To satisfy certification requirements the flanged edge should be flush against duct.

STEP 10

STEP 10

Inspect the completed seal to ensure that the SLIPSIL plug is correctly inserted and in cases with a ducted pipe or cable that it is correctly fitting.

STEP 1

STEP 1

Before starting the installation, any dirt or oil residues should be removed from the conduit opening. The internal diameter should be checked to make sure it is within tolerance of the SLIPSIL sealing plug selected.

 

STEP 2

STEP 2

The inside wall should then be treated with CSD lubricant along a distance which approximately corresponds with the length of the sealing plug.

STEP 3

STEP 3

The inside surfaces of both segments of the sealing plug need to then be covered with CSD lubricant.

STEP 4

STEP 4

The outer surfaces of both segments of the sealing plug need to be then covered with CSD lubricant.

STEP 5

STEP 5

Place both segments of the sealing plug into the conduit opening as far as the first serration. This should be placed around the pipe or cable if one is ducted.

STEP 6

STEP 6

Push both segments of the sealing plug evenly by hand, serration by serration, further into the conduit opening.

STEP 7

STEP 7

For some plugs at extreme tolernace, a wooden section and mallet may be required.

STEP 8

STEP 8

Air can become trapped inside the penetration. Use a lubricated screwdriver and carefully insert the end between the two plug segments to release the air.

STEP 9

STEP 9

To satisfy certification requirements the flanged edge should be flush against duct.

STEP 10

STEP 10

Inspect the completed seal to ensure that the SLIPSIL plug is correctly inserted and in cases with a ducted pipe or cable that it is correctly fitting.

Customer focused

At CSD, we understand that high-risk environments require the highest levels of safety, which is why we offer on site training and quality inspections.

CSD products have been extensively tested by all major worldwide classification societies and independent institutes, and are proven to ensure the highest standards of quality, safety, reliability and durability.

Please contact us for any further product information or to order a copy of our brochures.

Latest News

When it comes to fire safety there can be no shortcuts

4th July 2017

As part of CSD Sealing Systems campaign to raise awareness of fire prevention and safety within buildings and specifically wh ...

Read more

Customer testimonials

See more testimonials

"The CSD Sealing systems are very versatile and easy to use....."
Electrical Designer, Pendennis Worldclass Superyachts

© Copyright 2011 CSD Sealing Systems Limited

Legal Information - Terms and Conditions
Design by Boxmodel Website Designers